54
9. O.S.D Message
No. O.S.D
Message
Definition
1 NO
DISK
No hard-disk detected after power-up
2 BATTERY
LOW
Suggest change the battery and reset the system time
3 LOADING
System Boot up
4 VIDEO
LOSS
Video loss on the input
5 VIDEO
IN
Video input source
6 KEY
LOCKED
Key lock function is on
7 KEY
UNLOCKED
Key lock function is off
8
n1 OF n2 ITEMS PROGRESS n3 %
BACKUP n1/n2 NOW
9 BACKUP
COMPLETE
Backup complete
10
HD2 SPACE NOT ENOUGH
HD2 does not have enough capacity for the backup
11
NO ENTRY FOR BACKUP
Backup is not possible.
12 BACKUP
INCOMPLETE
Backup incomplete, since the user has pressed the STOP
button to stop it
13 NOT
FOUND
The system cannot find video in the Search function.
14 END
Playback of the recorded video has reached the end point
15 DISK
FULL
Hard-disks are full; this happens only when the DISK
FULL item in the setup menu is set to STOP.
16 EMPTY
The user presses the PLAY button or uses the SEARCH
function, but no video can be played.
17
SET TO NTSC, PLS RESTART
System has to be set to NTSC, please reboot (PAL is
similar)
18 SOFTWARE
UPDATE
Software update
19 PLEASE
RESTART
The system should be rebooted after the software has
been updated
20 NO
DISK
The user has pressed the Save key without putting in a
SD card, or there is a disk error.
21 DATA
NOT
CONTINUOUS
The system finds data in installed HDs cannot be used
contiguously. Suggest you remove HD2 from the system.
22 DISK
ATTACHED
HD2 has been attached.
23 DISK
REMOVED
HD2 has been removed.
24 FAN
STOPPED
The chassis fan has stopped for over 30 seconds.
25 HDn
ERROR
AT
xxxxx
There is a hard-disk error during recording, where n is the
hard-disk number and xxxxx is the hexadecimal location.
26 NOT
PRESENT
When the user tries to clear a disk that was not attached
in the setup menu.
27 SAVE
TO
DISK
Start saving to the JPEG file.
28 SAVE
TO
Fnnn.
JPG
Save to Fnnn. JPG (where nnn= 0..999)
29 SAVE
OK
Save to the JEPG is ok.
30
SD CARD WRITE PROTECT
A SD card is write-protected; or there is an error
