35
Duration
Set ting
Alarm
activated
Alarm
deactivated
Reset
Alarm recording
Non-Stop
Alarm
activated
Alarm
deactivated
Duration
Alarm recording
Duration
NOTE: Recording may be interrupted at the time of Alarm-in or Alarm-out.
LIVE images may be interrupted at the time of Alarm-out.
PRE- ALARM:
This option determines if the DGR201 will record video prior to an alarm occurring. When an alarm is
triggered the device will record the image prior to the alarm for 5 seconds. (
20 fields/sec
)
ON:
Enables this function.
OFF:
Disables this function.
NOTE: If the device is already recording before the alarm, the pre-alarm recording would not
take effect.
MOTION SETTING:
The video motion detection feature works similar to an external alarm trigger input, but triggers when
there are changes within the motion region of the image. To enable motion detection function, turn the
ENABLE
option
ON
, and set the
SENSITIVITY
(1 ~ 5) to a suitable value.
NOTE: The MOTION ENABLE option can only be used for single camera only, (Cannot be
used when if the DGR201 is connected to a MULTIPLEXER.
MOTION SETTING
MOTION ENABLE : ON
SENSITIVITY : 3
REGION
: SET
MAIN PAGE
ENABLE MOTION DETECTION
SET MOTION REGION
( 30 , 30 ) – ( 90 , 70 )
