12
Load
Open the door then placed the trays inside the chamber by the tray handle.
After the instruments are loaded, you may close the door.
Select the program
Enter to the main menu by pressing button, Select “Program”. Select the program by pressing
then press to confirm program, in the screen will appear the information of selected program as
the temperature and sterilization time (holding time), also the date, time, current pressure and
current temperature.
Start the sterilization program
Press
to start the cycle. The stage, conditions and the status of the cycle will appear on the display. The
sterilizers will perform the program automatically. (see appendix 2).
End of the cycle
Once the cycle is completed, “End” will appear at the end of the graphic. The printer will print out and the
digital report is saved in the USB memory if these are connected.
Caution: Always use the tray handle to load or unload the tray into the sterilizer. Failure to do so can
result in burns.
Program
Basic Set
Report
Label
Solid (121°C)
Solid (134°C)
Wrapped (121°C)
Wrapped (134°C)
Wrapped
134 ° C/3 . 5 Mi n
16- 07 -2 01 9
P: 0 .0k Pa T: 28 .2 ° C
10: 4 5:0 5
13 4° C Wrapp ed
P: 0 .0k Pa T: 28 .2 ° C
00: 0 0: 05
13 4 °C Wra p pe d
P: -0.2 k Pa T: 87 . 2° C
00: 0 0: 1 7
134 ° C Wr ap pe d END
P: - 0. 2k Pa T: 8 7. 2° C
0 0: 0 0:1 7
