Flight Dental Systems Clave B, Instruction Manual

Page: 4 / 25

4
1 General
Scope of Manual
This manual contains information concerning the installation, operation and maintenance of the
steam sterilizer. To ensure proper performance of the sterilizer, the instructions given in this
manual should be thoroughly understood and followed.
Keep the manual near the sterilizer in an accessible location for future reference.
Intended Use
The steam sterilizer described in this manual is intended for the sterilization in all medical, dental,
beauty, vet and tattoo fields of the following types of instrument loads: solid, porous, hollow loads
type A and hollow loads type B, un-wrapped, single wrapped and double wrapped, and liquid, that
are compatible with steam sterilization.
General Safety Instructions
 Read and understand this manual before attempting to install or operate the sterilizer.
 Make sure that all the installation conditions are fully complied with.
 Ensure that the voltage agrees with the supply voltage specified on the rating plate of the
sterilizer.

This appliance must be grounded. Connect only to a properly grounded outlet.
 Do not cover or block any openings on this appliance.
 Use this appliance only for its intended use as described in this manual.
 Do not exceed the maximum weight limit of the loads specified in this manual.
 Do not operate this appliance if it has a damaged cord or plug or if it is not working
properly or if it has been damaged or dropped.
 Never put flammables or explosive products into the sterilizer.
 The sterilizer may not be operated in areas in which gas or any other explosive or volatile
substance is present.
 Installation and repair work should only be performed by authorized service technicians.
Work by unqualified persons could be dangerous and may void the warranty.
Standards and directives
The steam sterilizers were designed and produced in conformity with the following directives and
standards:
Directives:
97/23/CE Pressure equipment.
93/42/EEC Medical devices (class II b).
Standards:
EN 13060 Relative to small steam sterilizers.
EN 61010-1 Safety regulations for laboratory devices - Part 1: General regulations.
EN 61010-2-040 Safety regulations specific to sterilizers used in the processing of medical
material.
EN 61326-1 Electromagnetic compatibility regulations for laboratory devices.