10
Parameter
The “Parameter” menu permits setting the following options:
*Holding time *Dry time
Select “Parameter” from the menu by pressing button.
Select the program by pressing then press button.
Select the parameter by pressing button. Adjust it by pressing .
Press
button to save and exit.
Unit
Select “Unit” from the menu by pressing button.
Select the parameter by pressing button. Adjust it by pressing .
Press
button to save and exit.
Preheat
When this mode is activated, the chamber and steam generator start to warm until it reaches the minimum
temperature to begin a sterilization cycle. This helps to reduce the total cycle time and improve the drying
efficiency. The “Preheat” mode will be deactivated after one hour of inactivity.
Select “Preheat” from the menu by pressing button.
Adjust it by pressing .
Press
button to save and exit.
Parameter
Unit
Preheat
Expiry date
Solid (121°C)
Solid (132°C)
Wrapped (121°C)
Wrapped (134°C)
Parameter
Unit
Preheat
Expiry date
Pressure: kPa
Temperature: °C
Parameter
Unit
Preheat
Expiry date
Preheat: off
Holding time: 20.0
Dry time: 03.5
