GARANT drag hose spreader
Service and maintenance
Fliegl Agrartechnik GmbH, 84453 Mühldorf am Inn, Germany
52 of 77
8.3.2 Check the safety equipment
All devices for stopping in an emergency must be checked individually and
separately from each other. In the case of faulty safety devices, stop the
machine immediately and secure it against reactivation.
Function test of the emergency stop equipment
1. Turn on ignition, start towing vehicle
2. Stop towing vehicle, turn off ignition
Operating the device for stopping in an emergency must result in the deactivation of all
machine functions:
-
Start enable
-
Motors and pumps
-
Hydraulically operated parts
8.3.3 Cleaning the machine
During the first four weeks, clean the attachment only with clear water and do not use a high-pressure
cleaner. If the attachment is delivered in winter, it must be washed immediately after it is received to
remove any road salt that has collected on the attachment.
Note the following rules for upkeep of the attachment:
-
Wash the attachment only with clear water without any cleaning additives to prevent paint
damage. Repair any paint damage immediately.
-
When cleaning with a high-pressure cleaner, maintain a distance of at least 400mm for the
spray nozzle.
-
The water temperature must not exceed 60° when cleaning.
Clean the attachment after every use in winter to prevent damage from road salt.
Some of the above tasks depend greatly on the type of use and the ambient
conditions.
The cycles indicated above are the minimum requirement.
Different maintenance cycles may be needed in individual cases.
In this case:
-
Correct the values given in these operating instructions.
-
Inform operating personnel about the change.