GARANT drag hose spreader
Preparation and setup
Fliegl Agrartechnik GmbH, 84453 Mühldorf am Inn, Germany
43 of 77
6.6 Attaching the hydraulic lines to the tank trailer
The hydraulic lines used to control the spreader
must be routed to the tank trailer, e.g. through the
frame.
As shown in the hydraulic diagram,
4 hydraulic lines must be connected to the
tractor:
The ends of the lines feature SVK plugs
for establishing the connection to the tractor.
2 lines for the pressure sequence
valve for the folding action
2 lines for the valve for the oil motors
of the screw distributors
SVK plugs
The hydraulic lines should be routed forward,
ideally through the frame.
Using a long pole, the hydraulic lines can be
easily threaded through the frame.
Fig. 30
:
Routing thehydraulic lines