GARANT drag hose spreader
Preparation and setup
Fliegl Agrartechnik GmbH, 84453 Mühldorf am Inn, Germany
36 of 77
Attach the H-frame to the bracket. The correct
position of the hole pattern must be selected such
that the centre of the mounting lugs of the
spreader can later be attached at a height of
1500 to 1550 mm.
The height of 1500-1550 mm is a guide value for
30.5" tyres.
Mounting lug for spreader
Fig. 19
:
Establishing the connection
Important! The mounting lug must be
attached in this position.
To do so, you must determine the correct position
of the spreader on the H-frame by measuring the
height.