Service and maintenance
96
10.4.3 Corrosion protection
Assemblies and components of the vehicle are supplied from the factory with comprehensive corrosion
protection. This corrosion protection can be damaged by a wide range of external influences. It must
therefore be checked on a regular basis and restored if necessary.
Caution: risk of damage!
Road salt is highly aggressive and can damage the corrosion protection.
Therefore, observe the following during winter:
-
Clean the vehicle more frequently
-
Carefully remove any road salt residue
-
Check the corrosion protection more frequently and, if necessary,
have it restored
To avoid corrosion:
-
Check the corrosion protection more frequently when using the vehicle in winter.
-
Check the vehicle, and the compressed air and hydraulic lines in particular, for corrosion on a
regular basis.
-
Have damaged corrosion protection restored by a specialist workshop.
-
Have a specialist workshop remove any corrosion and apply corrosion protection to the affected
areas.
10.4.4 Lubrication schedule
The lubrication schedule applies to all Fliegl push-off trailers.
Failure to ensure correct and sufficient lubrication carries a risk of costly repairs at a later stage.
Dispose of old oil and grease in the correct manner.
Lubricants to use:
Lubricants
Type
Quality
Oils
Hydraulic oil HLP 46
51524-2
Gear oil SAE 90 EP
API-GL 5
Greases
Lithium grease
DIN 51 502, KP 2K
Notice!
There is a risk of injury due to rotating and movable parts when lubricating. When
lubricating the towing vehicle engine, apply the parking brake and remove the
ignition key.
Lubricating the drive shafts:
The drive shafts must be lubricated at the
specified points every 50 operating hours.
Fig. 120
:
Lubricating points
