Safety instructions
25
2.14.1 Danger zone around PTO
There is a risk of entanglement in the PTO and driven components which can lead to serious injury.
Before starting the PTO:
-
Ensure that all protective devices are in place and are in protective position.
-
Ensure that there are no persons in the danger zone around the PTO.
-
Switch off the PTO when not in use.
2.14.2 Danger zone around machine parts that continue running
If there are parts on the machine that continue to run after it is switched off, this can result in accidents
involving personal injury. After turning off the drives, the following machine parts continue to run:
-
Drive shaft
-
Spreader (optional)
-
Dosing roller (optional)
2.14.3 Safety distance from overhead lines
RISK OF DEATH! Always maintain the safety distances.
Overhead lines carrying voltage
Safety distance from the
overhead line
Up to 1 kV
1 m on all sides
> 1 kV
– 110 kV
3 m on all sides
> 110 kV
– 220 kV
4 m on all sides
> 220 kV
– 380 kV
5 m on all sides
Unknown voltage
> 5 m on all sides
Only enter the danger zone once all machine parts have come to a complete
standstill.
