16
4. ONE SPOUT: Designate which pump and
motor cables connect to which ports on the
electronics board (located inside the cabinet
top). If only one cabinet is attached, the
cables can be attached to either port set. By
default, they are typically attached to
Connector A and Connector C.
Then,
skip to Step 7.
5. TWO SPOUTS: If you are running two
spouts with Flavor Burst, designate which
will be “Spout 1”. On a 44FCB system, the
first set of #1-4 trays will be connected to
one spout, and the last set of trays #A-D will
be on another spout.
6. TWO SPOUTS: If Flavor Burst blending
systems are attached to two spouts, the
Jumbo Touch Panel needs to know which
ports are controlling which spout. If you
have two separate cabinets (ie, the Base-
2S), follow the cables from each cabinet to
the electronics board to determine which
cabinet is connected to which ports. If you
have a 44FCB system, the pump cables will
be labeled 1-4 and A-D. Follow the motor
cables from each spout to the electronics
ports inside the cabinet top.
NOTE:
IF YOU ARE UNSURE, CONTACT
YOUR LOCAL DISTRIBUTOR FOR
INSTRUCTIONS ON HOW TO CHECK YOUR
CONNECTIONS.
7. Select whether your system is an Auto Draw
system and if you are using Timed
Servings.
NOTE:
THE AUTO DRAW SYSTEM IS AN
OPTIONAL UPGRADE KIT (ADPT TY80S-
FCB1CTP). CONTACT YOUR LOCAL
DISTRIBUTOR FOR MORE INFORMATION.
NOTE:
TIMED SERVINGS FEATURE CAN
ONLY BE USED ON THE SPOUT USING THE
FLAVOR BURST SYSTEM. THE OTHER
SPOUTS ARE NOT CONNECTED TO OR
CONTROLLED BY THE JUMBO TOUCH
PANEL.
