2.1
PACKING CHECK LIST
1 off Firebox / Burner Assembly
1 off Flue Spigot
1 off Closure Plate
1 off AA Battery
1 off Literature / Loose Items Pack
4 off Ceramic Radiants – packed inside top fitting
2.2
INSTALLATION OF FIRE
2.2.1
Preparation.
a)
Remove the dress guard by springing the location wires out at the top
and lifting away. See Fig. 2.
Take care not to scratch the trim.
Fig. 2
Remove the Dress Guard.
b)
Remove the flue spigot restrictor if the fire is to be fitted to a pre cast
flue. The flue spigot restrictor is attached to the spigot with two
screws.
c)
Fit the flue spigot to the back panel using four screws provided.
9
