Guider User Guide | www.ff3dp.com
62
● After finishing transferring, the printer will heat up automatically. And when
heating finishes, the print will start to build the model.
6.2.2 Print from USB Flash Disk
①
Insert your USB flash disk with target .g or .gx file to your Guider. .
②
Turn on the Guider. Make sure the build plate has been leveled and the filament is
loaded.
③
Tap
[Print]
and then tap the
SD Card
icon in the middle. The file(s) will display on
the screen., Select the file you want to print and tap
[Print]
. The file will be
transferred the printer.
⑥
And the printer will heat up the nozzle automatically and start to print after the
nozzle reaches the aimed temperature.,
Abort
：
To stop heating and printing. Once you tap [Abort], the process is irreversible.
Pause
：
To suspend the print job, you can tap it again to resume it. It’s usually used
when you want to change the filament halfway.
Summary of Contents for Guider
Page 1: ...Guider User Guide www ff3dp com 1 Flashforge Guider 3D Printer User Guide...
Page 32: ...Guider User Guide www ff3dp com 31 then Tap Finish to exit...
Page 67: ...Guider User Guide www ff3dp com 66 2 Model with Small area Overhang Treelike support structure...
