Guider User Guide | www.ff3dp.com
35
Method 6:
Select and drag the target file to the icon of Flashprint.
Note: .
STL, .OBJ, and .FPP
,
ways to store 3D models, are supported by Flashprint
for editing.
Generating Rilievo
Loading a png, jpg, jpeg, bmp picture file into the FlashPrint. And the following
dialogue box(5-3) will pop up. The setting box includes settings for shape, mode,
maximum thickness, base thickness, bottom thickness,width, height, top diameter and
bottom diameter.
Shape: including plane, tube, canister and lamp.
Mode: including “darker is higher”and “lighter is higher”.
Maximum thickness: Z value of the model
Base thickness: The minimum raft thickness and the default value is 0.5mm
Width: X value of the model
Depth: Y value of the model
Bottom thickness: For tube, canister and lamp to set up bottom thickness
Top diameter: For tube, canister and lamp to set up the top diameter
Bottom diameter: For tube, canister and lamp to set up the bottom diameter
Summary of Contents for Guider
Page 1: ...Guider User Guide www ff3dp com 1 Flashforge Guider 3D Printer User Guide...
Page 32: ...Guider User Guide www ff3dp com 31 then Tap Finish to exit...
Page 67: ...Guider User Guide www ff3dp com 66 2 Model with Small area Overhang Treelike support structure...
