Guider User Guide | www.ff3dp.com
50
5.1.13 Print Menus
①
Connect Machine
You can connect the Guider with your PC via a USB cable.
Note:
The machine icon on the bottom right displays the connection status:
Connected
Disconnected
a. Connect your Guider with your PC via an USB cable.
b. Turn on your Guider and start Flashprint.
c.Click
[Print]--[Connect Machine]
,
then select USB in the
[Connection Mode]
option and select machine you want to connect in
[Select Machine]
option. If you can
not find your machine, click the
[Rescan]
button to scan your machine and select it.
Finally click
[Connect]
button to connect to the printer. If you still can not find your
machine after rescan, which means you haven’t installed the driver in the software.
②
Disconnect Guider
Click
[Print]--[Disconnect]
to disconnect your PC and Guider.
Summary of Contents for Guider
Page 1: ...Guider User Guide www ff3dp com 1 Flashforge Guider 3D Printer User Guide...
Page 32: ...Guider User Guide www ff3dp com 31 then Tap Finish to exit...
Page 67: ...Guider User Guide www ff3dp com 66 2 Model with Small area Overhang Treelike support structure...
