Guider User Guide | www.ff3dp.com
44
④
Supports:
When print with model contains part hanging in the air or top-heavy,
support is necessary. Click
[supports]
to create support part for the printing.
⑤
Raft:
This function will help the model to stick well on the platform.
⑥
Wall:
During dual color printing, this function will help to clear the leaking
filament of another extruder.
⑦
Vase Mode:
No capping for the model
⑧
Resolution
：
You have three resolution solution(with default setting)to choose from,
high resolution is corresponding with slow printing speed, opposite for the low
resolution.For PLA printing, an extra solution “Hyper” is available.
⑨
More options:
Click
[More options]
to set for layer, shell, infill, speed and
temperature. Different resolution solution is corresponding to different defaults, click
[Restore Defaults]
to back to default setting.
●Layer
a. Layer:
Layer thickness of the printing model. With a small number, the
surface of the model will be more smooth.
b. First Layer Height:
This is the first layer of the model, which will affect the
sticking performance between the model and platform. Maximize is 0.4mm, usually
the default is ok.
c. Shell:
Contains of the outside shell number, capping layer number (under vase
pattern, top solid layer setting is invalid.)
● Primeter Shells:
Maximize is 10
a. Top Solid Layer:
Maximize is 10, minimum is 1.
b. Bottom Solid Layer:
Maximize is 10, minimum is 1.
● Infill
a. Fill Density
means fill rate.
b. Fill Pattern
is the pattern of filling shape which effects printing duration.
Summary of Contents for Guider
Page 1: ...Guider User Guide www ff3dp com 1 Flashforge Guider 3D Printer User Guide...
Page 32: ...Guider User Guide www ff3dp com 31 then Tap Finish to exit...
Page 67: ...Guider User Guide www ff3dp com 66 2 Model with Small area Overhang Treelike support structure...
