Guider User Guide | www.ff3dp.com
11
2.1.2 Terms
Build Plate
The glass surface on which the Guider builds an object.
Build Tape
The blue tape that covers Guider’s build plate so that
the object can adhere to the build plate well.
Build Volume
The three dimensional amount of space that an object
will use once it is completed. The largest build volume
of Guider is 140*140*140
Leveling Knobs
Knobs under the build platform that used for adjust the
distance between the nozzle and build plate.
Extruder
The device that draws the filament from the spool,
melts it and pushes it through a nozzle onto the build
plate.
Nozzle
Also called “print head”, which located at the bottom
of the extruder where heated filament is squeezed out.
Cooling Fan
To cool the outer assembly of the extruder and gear
motor
Filament Intake
An opening located at the top of the extruder .
Filament Guide Tube
A plastic piece that guides the filament from the
filament box to the filament intake
Filament Cartridge
A specific box for placing Flashforge filament
Summary of Contents for Guider
Page 1: ...Guider User Guide www ff3dp com 1 Flashforge Guider 3D Printer User Guide...
Page 32: ...Guider User Guide www ff3dp com 31 then Tap Finish to exit...
Page 67: ...Guider User Guide www ff3dp com 66 2 Model with Small area Overhang Treelike support structure...
