Flashforge Guider 3, User Manual

Page: 5 / 56

The room temperature should be between 15℃ and 30℃.
The humidity should be between 20RH% and 70RH%.
Any modification of the equipment by yourself will result in the situation that you will
not be entitled to warranty rights anymore.
Please keep the distance between the extruder and build plate for at least 50mm
during filament loading. Too-close distance may cause nozzle clogging.
Please operate the equipment in a well-ventilated environment.
Do not use the equipment for illegal activities.
Do not use the equipment to make any food storage products.
Do not put the printed model into your mouth.
EQUIPMENT ENVIRONMENT REQUIREMENTS
EQUIPMENT PLACEMENT REQUIREMENTS
COMPATIBLE FILAMENT REQUIREMENTS
FILAMENT STORAGE REQUIREMENTS
LEGAL STATEMENT
The equipment must be placed in a dry and ventilated environment. A distance of at
least 30cm must be reserved at the left side and rear side of the equipment, and a
distance of at least 45cm must be reserved at the right side and front side of the
equipment.The storage temperature should be between 0℃ and 40℃.
When using the equipment, it is recommended to use Flashforge’s filaments.
If non-Flashforge filaments are used, there will be certain differences in material
characteristics, and thus printing parameters may need to be adjusted.
Please store filaments in a dry and dust-free environment after unpacking. It is
recommended to use the matching filament dry box for storage.
The user has no right to make any modification to this user guide.
Flashforge will not be responsible for any safety accidents caused by the disassembly
or modification of the equipment by the customer. No one is allowed to modify or
translate this guide without the permission of Flashforge. This guide is protected by
copyright, and Flashforge reserves the right of the final interpretation of this guide.
First Edition (August 2022)
Copyright © 2022 Zhejiang Flashforge 3D Technology Co., Ltd. All Rights Reserved.
03