Flashforge Guider 3, User Manual

Page: 21 / 56

Users can click the [ ] - [Maintain] to query
the currently encountered problems.
As the firmware will be upgraded from time to time, please
refer to the actual display screens. The following is only a
brief introduction of functions.
ATTENTION
When operating the extruder, the power supply must be
disconnected.
ATTENTION
6. Maintenance
6.1 Maintenance Screen
The replacement method can be viewed by clicking the [How to change the extruder?]
on the maintenance screen. Please operate following the instructions on the screen.
6.2.1 Nozzle Replacement
6.2 Extruder Maintenance
< Maintain
Screw
How to change the extruder?
1. Please loosen the fixing screws as shown in the
figure and remove the nozzle assembly.
2. Install the new nozzle assembly.
19
Copy Logs
How to change the extruder?
How to replace the flexible steel plate platform?
>
>
>
< Maintain
Camera About Status Maintain Upgrade
How to Install a Glass Platform？
Clean the clogged nozzle
Routine Maintain
>
>
>
< Maintain
2/2
1/2
2/2