Flashforge Guider 3, User Manual

Page: 19 / 56

Heat Heat Heat
Calibration
Home Move Network Cloud
The temperature of the extruder and platform can be set in advance as required on the
preheating screen.
5.3 Preheating Screen
220℃
Extruder Platform
45℃
Cancel
45℃/220℃
Extruder Platform
45℃
[Calibration]
Z-Axis Calibration, Sensor Calibration,
Assist Calibration[complete mode,
simplified mode].
[Home]
[Move]
[Network]
[Cloud]
[Camera]
[About]
[Status]
[Maintain]
[Upgrade]
Here you can make each axis of the equipment return to the zero position.
Here you can manually move the X, Y, Z-axis of the equipment.
Here you can connect to the wireless network, wired network and hot spot.
Here you can connect to the FlashCloud or Polar Cloud.
Here you can turn on the camera and view the time-lapse video.
Here displays the basic information about the equipment.
Here displays the running status of the equipment.
Here lists some maintenance items for users to check if users encounter
any problems.
Here is for firmware upgrade. Users can upgrade to the latest firmware of
the equipment when connecting to wireless network.
5.4 Tools Screen
17
1/2