Installation instruction
FläktGroup
DC_8658GB 20181214_R0
We reserve the right to make changes without prior notice
6
GENERAL INSTRUCTIONS
EQAZ-04 BASE FRAME, UNIT SIZES 005-090
Crossbeam
Drill 4 ø7,3 mm holes using
the ø 6,3 pilot holes provided
and fit M8 Taptie self-tapping
screws as safety screws.
Jointing
piece
Arrange the beams so
that they are level,
tighten the M8
screws/nuts through
the angle bracket,
beam and cross beam
to 28 Nm.
2
1
150
EUAZ 2
Casing
ASSEMBLY OF THE EQAZ-04 IN
SEPARATELY DELIVERED
VERSION
The base frame can be supplied either in
assembled or unassembled condition.
Assemble the base frame as shown,
using one cross-beam at every beam
joint and, if required, several cross-beams
evenly distributed along the base frame.
TO FIT (SECURE) THE UNIT TO
THE BASE FRAME
Fit one angle bracket (1), at each end of
the base frame. Fit the remaining angle
brackets spacing them evenly along
the beams. Secure them with self-
tapping screws (2).
