Installation instruction
FläktGroup
DC_8658GB 20181214_R0
We reserve the right to make changes without prior notice
16
GENERAL INSTRUCTIONS
INSTALLATION OF THE JOINTS, ONLY APPLIES FOR
OUTDOOR UNITS
The EQBZ-01 roof is fitted to each individual unit at the factory
as shown.
Roof joint to be fitted on site when multi-function blocks are
delivered.
On size 108-216 units, place the cover trim on the joint where the
folded edges of the roof sections meet and secure it by applying
light hammer blows to ”snap” it on.
PG slip clamp, to be fitted
over the joints between the
units (supplied)
PG slip clamp,
factory-mounted
Roof panel
End plate
Delivery unit
Delivery unit
PG slip clamp, sizes 009-090 or
cover trim, sizes 108-216, to be
fitted over the joints between
the units (supplied).
Center the PG slip clamp
so that its right-hand end
extends equally as much
as its left-hand end from
the edge of the roof.
Then bend the clip clamp
ends over the edge of
the roof.
Secured roof joint
Secure the end pieces using
self-threading screws.
