Step 7.
Step 8.
Step 9.
Step 6.
When the screen looks like Figure 32 you can click
‘NEXT’ with the mouse.
When the screen looks like Figure 33 you can click
‘NEXT’ with the mouse. This will automatically close the
room setup utility and you’re ready to run a scenario!
Click ‘Restart Flaim Systems’ on the ipad to get back
into main operating mode
When the screen looks like Figure 31 you can click
‘Calibrate floor’ with the mouse. Note that as the
headset is on the floor you do not need to enter a height
in the field.
If the software alerts that the headset is
not visible, please move it briefly to wake
it up and try again.
Note
Figure 31:
Room Setup Step 6
Figure 32:
Room Setup Step 7
Figure 33:
Room Setup Step 8
26
