37
Copyright © Fixstars Corporation. All rights reserved.
MAC address of GigaAccel 180 eth0 is printed on the side of GigaAccel 180 as “
1
ST
MAC: ~
”
Set the
DHCP
service start up option as follows.
# vi /etc/sysconfig/dhcpd
(setting value)
DHCPDARGS=eth0
Restart the
DHCP
service after editing the configuration file.
# service dhcpd restart
A.9
TFTP
service settings
Edit the
xinetd
configuration file as below so that TFTP service will start
automatically.
# vi /etc/xinetd.d/tftp
(setting value)
service tftp
{
disable = no
←
change "yes" to "no"
(Do not change other parameters)
}
Restart
xinetd
after editing its configuration file.
# service xinetd restart