25
Copyright © Fixstars Corporation. All rights reserved.
In
the setting window, configure as follows.
Parameter 1
Parameter 2
Value 1
Base Directory
-
C: tftpboot
\
TFTP Server
DHCP Server
Syslog server
-
Turn off all
Persistant leases
Bind DHCP to this address
(192.168.2.10)
TFTP Security
-
Read Only
Timeout
3
Max Retransmit
6
Tftp port
69
Local ports pool
Empty
Option negotiation
Check
PXE Compatibility
Uncheck
Show Progress bar
Check
Translate Unix file names
Check
Bind TFTP to this address
Check(192.168.2.10)
Allow ‘ ’ As Virtual root
\
Check
Use anticipation window of
Check(8192 byte)
TFTP
configuration
Advanced
TFTP Options
Global Settings
-
DHCP Options
-
After configuration click “OK” button and re-start “tftpd32_gui.exe”.
The next section describes the DHCP setup. Click “DHCP Server” tab, and then
configure as follows. After configuration, click “Save” button and save the settings.
Parameter
Value
IP pool starting address
192.168.2.11
Size of pool
1
Boot File
ga180-cifsroot-X.X.XX-X.ydl.X.img
WINS/DNS Server
Empty
Default router
Empty
Mask
255.255.255.0
Domain Name
Empty
Additional Option
Empty
*1 If you install two GigaAccel 180, set Size of pool to 2.
*2 If “Additional Option” is left blank, IP adress of host workstation will be set to
“192.168.2.10”, CIFS mount account will be “root” and the password will be “passw0rd”.
If you want to modify them, set all of them as follows.
Additional Option
The first field : 17
The second field : //{Host IP Address}/{Shared Folder} /cifs -o user={Account
name},password={Password}
(ex:default value)
The second field : //192.168.2.10/CIFS /cifs -o user=root,password=passw0rd
[Note] You can enter the second field in less than 63 characters. If an invalid value is
entered, GigaAccel 180 can not boot. If GigaAccel 180 can not boot, please refer to the
troubleshooting.