manualshive.com logo in svg

Fixstars GigaAccel 180, User Manual, Page: 39 / 50

Share
Download
Fixstars GigaAccel 180 User Manual Download Page 39

35 

Copyright © Fixstars Corporation. All rights reserved.

 

A.3  Network settings

 

Perform host machine network configurations. eth0 will be used for 

communications (NFS mount, etc.) with GigaAccel 180. Assign the IP address 
(192.168.2.10) beforehand. 

 # vi /etc/sysconfig/network-scripts/ifcfg-eth0 

 (setting value) 

 DEVICE=eth0 

 ONBOOT=yes 

 BOOTPROTO=static 

 IPADDR=192.168.2.10 

 NETMASK=255.255.255.0 

 

A.4    Installation of necessary services

 

Install necessary services which are 

dhcp, nfs-utils, rpcbind, xinetd

, and 

tftp-server

. 

Also, enable these services to start automatically upon start up. 

 # yum install dhcp nfs-utils

　

rpcbind

　

xinetd

　

tftp-server 

 # chkconfig dhcpd on 

 # chkconfig xinetd on 

 # chkconfig nfs on 

 

A.5  Prepare disk image

   

Decompress the Fedora7 file system for GigaAccel 180 which was downloaded 

beforehand into “

/nfsroot

” folder. 

 # mkdir -p /nfsroot

 # cd /nfsroot

 # tar zxf Fedora-7-image-pxcab-UI.tgz

 

Copy GigaAccel 180 kernel RPM into the file system for GigaAccel 180. 

 # cp kernel-X.X.XX-X.YYYYMMDDpxcab.ppc64.rpm /nfsroot/Fedora7-pxcab-UI/tmp

 

 

Summary of Contents for GigaAccel 180



















































Reviews:

No comments