IP-RMH1
ReteMatic™ Head Unit
4
Installation and Configuration Manual
PRODUCT PRESENTATION
The
ReteMatic™ Network Infrastructure
has been designed to meet the application needs required by
industrial and harsh environments by combining power and robust data communication over a single
medium, the standard power cable.
IP-RMH1
is a ReteMatic Head Unit, originating a ReteMatic bus to which up to ten Field Units can be
connected. It provides one 10/100 Ethernet port to connect the ReteMatic network to a standard Ethernet
network, a Power Inlet which connects to a wide range AC power source, and a ReteMatic outlet where the
input power, adequately treated, is combined with the data communication to create a ReteMatic bus.
The hardened design of this unit allows to achieve its full performance even under heavy environmental
conditions, and the connectivity at up to 100 Mbps PHY rate is suitable for audio and video streaming. With
energy saving features and easy installation, the IP-RMH1 makes it easy to build up a ReteMatic network to
connect standard Ethernet devices for the most demanding field applications.
T
ECHNICAL
S
PECIFICATIONS
IP-RMH1 meets the technical specifications defined in the following table:
FEATURE
SPECIFICATION
Data and routing protocols
IEEE 802.3 (10BASE-T), IEEE 802.3u (100BASE-Tx)
AC input
90–260VAC, 50~60 Hz, 6A max
Power consumption
(without external load)
Normal: 4W
Power Saving mode: 0,5W
Dimensions
483 x 240 x 45 mm (19 x 9,45 x 1,77 in)
Weight
2,9 kg (6,39 lb)
Operating temperature
-40° to 80°C (-40º to 176ºF)
Operating humidity
10–90% maximum relative humidity, noncondensing
Storage humidity
5–95% maximum relative humidity, noncondensing
Security encryption type
128-bit AES data encryption CCMP
Bandwidth
100 Mbps
Maximum power available at
ReteMatic OUT connector
690W @115VAC
1380W @230 VAC
IP-RMH1
enters in Standby Mode automatically when the Ethernet link is down for a given amount of time
(the default time is 5 minutes); in this Standby Mode, it consumes less than 0.5W
