IP-RMH1
ReteMatic™ Head Unit
14
Installation and Configuration Manual
Neighboring Domain Interference Mitigation (NDIM)
This functionality is intended to maximize the overall performance of ReteMatic network in presence of
neighboring ReteMatic networks, through the coordination and isolation mechanisms.
Once a neighboring domain is detected, a domain master takes all needed actions to mitigate interference
with the neighboring domains’ nodes, including coordinating with them while guaranteeing that QoS
requirements for existing service flows are maintained.
This section shows the mode used in NDIM procedure and the value of the Domain Identifier; these values
are read only and cannot be modified.
Available Connections
This sections reports the available ReteMatic units discovered by the Head Unit over its ReteMatic bus.
For each unit, identified by its Device ID and MAC address, an indication of the estimated low-level bitrates
available for transmitting and receiving are displayed: these values should not be intended as an actual
throughput of the connection, but only as an indication of the quality of the link: the higher the values, the
higher the quality of the communication with that node. As an indication, a value of 50 or higher means a
good and stable connection.
IP N
ETWORK
C
ONFIGURATION
P
AGE
The
IP Network Configuration
page is reached by clicking on the “
IP
” link on the left pane and contains
the IP settings for the unit.
The IP address of the unit can be automatically assigned by a DHCP server, or statically defined; in case
the DHCP option is disabled, the IP parameters must me manually configured. These parameters will be
stored in the unit and will become active at the next reboot.
Figure 6 - Web interface: IP setting
