19
1.
Attach the steel plate cover (#66) to the top beam (#8), main bottom frame (#1) and
front bottom frame (#2) with 6 M8×16 hex bolts (# 60) and
6×Φ8
flat pads (# 55) in
sequence.
1
、
Tighten all bolts and nuts with the wrench,
2
、
Now your instrument is fully assembled.
3
、
Check that all pulleys and wire ropes are secured before using them properly.
4
、
In the first stage of use, make certain adjustments to the wire rope according to
the actual conditions.
Maintenance
Maintenance Methods:
To extend the service life of the instrument, it is necessary to lubricate the parts on t
ime, this product has been preliminarily lubricated before leaving the factory, but afte
r a certain period of use the necessary lubrication and maintenance must be carried
out between the guide rod and the weight plate.
Note: Do not use motor oil butter, otherwise it will trap dust and dirt in the air, sewi
ng machine oil is recommended.
1.
It is recommended to regularly inspect all pulleys and wire ropes for signs of wear
.
2.
Regularly check and adjust the tension of the wire rope.
3.
Regularly check all moving parts for signs of wear and damage, and if there is a
problem, stop using the instrument immediately and contact our sales department.
Summary of Contents for MLD-M5
Page 1: ...MLD M5 Fitness Equipment Co LTD ...
Page 4: ...3 General Assembly Drawing MLD M5 Executed Standard GB17498 1 ...
Page 8: ...7 ...
Page 9: ...8 ...
