Fitness Equipment MLD-M5, Product Manual

Page: 10 / 21

9
Installation steps
Notes:
1. Spacers should be placed on both ends of the bolt (against the bolt head and nut),
unless otherwise specified.
2. For preliminary assembly, hand-tighten all bolts and nuts, and tighten with a wrench
when fully assembled.
3. Some parts have been pre-assembled in the factory.
4. The product is recommended to be installed by more than two people.
Figure 1
1. Insert the 2 counterweight guide rods (#5) into the mounting holes of the main base
frame (#1) with the 3 large holes in the main base frame(#1) facing upwards and
secure with 2 countersunk hex bolts M10x20 (#72);