10
2.
Connect (#1) and (#2) with 2 hex head bolts M10x25 (#64), 4 flat washers
Φ10
(#56)
and 2 M10 lock nuts (#73);
3.
Wrench tighten all bolts and place counterweight cushion (#32) along counterweight
guide bar (#5).
Installation steps
Figure 2
1.
Place the counterweight block (#27) into the counterweight guide bar (#5) in sequence
(grooved side down), slide the weight increasing rod bushing (#30) onto the bar (#31)
with the bushing hole aligned with the topmost hole. Insert the weight increasing rod
retaining pin (#29) into the center hole of the counterweight block.
2.
Slide the counterweight top block (#26) onto the weight increasing rod (#31) and the
weight increasing rod bushing (#30), place the large flat pad
Φ12
(#28) on top of the
counterweight top block (#26), and insert the L weight increasing pin (#33) into the
Summary of Contents for MLD-M5
Page 1: ...MLD M5 Fitness Equipment Co LTD ...
Page 4: ...3 General Assembly Drawing MLD M5 Executed Standard GB17498 1 ...
Page 8: ...7 ...
Page 9: ...8 ...
