F1300N.2 Rotary Table Operating Manual
© 2022 Fisnar
- 37 -
F1300N.2 Rev 01
OPERATION MODES
FIG. 12: Index Mode
INDEX MODE
index Mode allows the machine to dispense onto a workpiece in a fixed position for a set period of
time, before indexing to another position at a set angle.
1.
Touch the
button to enter the “Machine Settings” screen and touch the
operation mode button until the button displays the text “Index Mode”.
Then touch the back button to exit the “Machine Settings” screen and return back
to the “Production” screen.
2.
Touch the parameter value cell e.g.
to input the required parameter
value.
Index Angle
: Sets the angle (degrees) duration that the motor will rotate for at
the end of the program cycle, when the Z-Axis drive cylinder reaches the “UP”
position after completing the “Dispense Time”. No fluid material is dispensed
during the index angle.
Head Time
: Sets the time (seconds) before the machine starts dispensing, once
the Z-Axis drive cylinder reaches the “DOWN” position. No fluid material is
dispensed during the head time.
Summary of Contents for F1300N.2
