FISNAR F1300N.2, Operating Manual, Page: 3 / 64

F1300N.2 Rotary Table Operating Manual
© 2022 Fisnar - 3 - F1300N.2 Rev 01
OVERVIEW
FIG. 1: Model F1300N.2 Rotary Table
The F1300N.2 rotary table provides an efficient method of dispensing a circular pattern on
areas that are difficult to access. The tilting Z-axis allows for controlled rotary dispensing at a
fixed angle.
Used for dispensing adhesives, silicones, greases and lubricants, the F1300N is fully
adjustable in rotation speed, circle diameter, and dispensing time. Dispense from barrels,
cartridges, or valves mounted on the Z-axis.
The Z-axis tilt is easily adjusted to dispense either on a vertical wall within a cylindrical part
or an outside wall. The system is fully programmable to control dispense delay, degree of
rotation, and wait period before cycling.
Three Operation Modes
Standard mode – For dispensing a continuous arc or circle diameter
Pulse mode – For dispensing multiples arcs over a defined circle diameter
Index mode – For dispensing in multiple fixed positions within a arc or circle diameter
Nine programmable memory slots
Adjustable fluid output pressure (0-100psi) for setting and controlling dispense pressure inside fluid
syringe barrel or cartridge. Alternatively used for actuating connected pneumatic dispense valve.
Touch screen LCD display for easy setup and operation
Fully programmable for accurate dispense results
7 channel I/O circuit for external control
Password-protected operator lock-out mode
Industry standard push-in fitting ensure easy system installation and integration into workplace
environments