Lit. No. 95902/95903, Rev. 01
15
June 15, 2008
MAINTENANCE
Electric Clutch
To minimize problems and extend the life of the
electric clutch, do the following:
• At the end of each snow season, remove and
clean the clutch.
• After cleaning the clutch, coat both mating
surfaces of the clutch with oil or light grease.
• Remove oil and grease prior to using the clutch
again.
Engine Service and Repair
Maintain the spreader engine according to the
engine Owner's Manual that is shipped with the
spreader. Engine warranty is covered by the engine
manufacturer and is described in the engine manual.
If service or repair is needed, contact an authorized
engine manufacturer service center. To serve you
promptly, the service center will need the make,
model, type, and code number for your engine.
Your nearest service center is listed in the "Yellow
Pages" under "Engines, Gasoline" or "Gasoline
Engines."
NOTE: The maximum choke point of the
Tecumseh Engine is adjustable. The unit is
shipped with the choke adjusted to be 75%
closed. See Choke Adjustment Procedure for
adjustment instructions.
• Use the two 5/8" x 6" take-up bolts at the front of
the spreader to adjust the conveyor chain tension.
Loosen the locknuts before attempting to adjust
the take-up bolts. Turn both sides equal amounts
to ensure the tension is equally distributed across
both sides of the conveyor chain.
• Always empty the spreader when it is not in use to
prevent a frozen conveyor chain.
Summary of Contents for PRO-CASTER
Page 23: ......
