manualshive.com logo in svg

Fisher-Price 79050, Owner'S Manual

The Fisher-Price 79050 Owner's Manual is essential for understanding the functionalities of this popular toy. You can effortlessly download this comprehensive manual for free from our website, manualshive.com, ensuring you have all the necessary instructions to maximize the enjoyment and safety of your Fisher-Price 79050 product.

Share
Download
background image

Assembly and Setup

Position the harness 
shoulder straps in the
desired strap slots (lower
or upper) in both the shell
and pad. 

Make sure the

harness shoulder straps
are not twisted.

6

Stay-in-View™ Infant Car Seat

21

Note:

For clarity, these illustrations show the

shell without the pad.

Lower Strap Slots

Upper Strap Slots

6

6

Summary of Contents for 79050

































































Reviews:

No comments

Related manuals for 79050

CONCORD ULTIMAX I-SIZE Instruction For Attachment And Use preview
ULTIMAX I-SIZE
Brand: CONCORD Pages: 104
Silver Cross Explorefix Instructions For Use Manual preview
Explorefix
Brand: Silver Cross Pages: 12
My Child Stirling Manual preview
Stirling
Brand: My Child Pages: 52
Titaniumbaby X Drive i Size 5973 Instructions For Use Manual preview
X Drive i Size 5973
Brand: Titaniumbaby Pages: 32
Britton B'Way Instructions Manual preview
B'Way
Brand: Britton Pages: 31
Pet Gear PG1117 Instruction Manual preview
PG1117
Brand: Pet Gear Pages: 3
Joie i-Quest signature Instruction Manual preview
i-Quest signature
Brand: Joie Pages: 67
Joie i-Spin Safe R Instruction Manual preview
i-Spin Safe R
Brand: Joie Pages: 24
Joie Curve C 0925 Instruction Manual preview
Curve C 0925
Brand: Joie Pages: 21
Joie elevate Instruction Manual preview
elevate
Brand: Joie Pages: 47
Joie i-Venture Instruction Manual preview
i-Venture
Brand: Joie Pages: 54
Joie spin safe Instruction Manual preview
spin safe
Brand: Joie Pages: 57
Joie Every Stage FX Instruction Manual preview
Every Stage FX
Brand: Joie Pages: 78
Joie Signature i-Spin Grow Instruction Manual preview
Signature i-Spin Grow
Brand: Joie Pages: 86
Joie signature i-Plenti Instruction Manual preview
signature i-Plenti
Brand: Joie Pages: 85
Joyello JL-1075 J-FIX User Manual preview
JL-1075 J-FIX
Brand: Joyello Pages: 20
Joyello JL-1072 J-TOPFIX User Manual preview
JL-1072 J-TOPFIX
Brand: Joyello Pages: 32
Joyello JL-1009 User Manual preview
JL-1009
Brand: Joyello Pages: 32

Brands by name

Popular brands

Load more brands