manualshive.com logo in svg

Fisher-Price 79050, Owner'S Manual

The Fisher-Price 79050 Owner's Manual is essential for understanding the functionalities of this popular toy. You can effortlessly download this comprehensive manual for free from our website, manualshive.com, ensuring you have all the necessary instructions to maximize the enjoyment and safety of your Fisher-Price 79050 product.

Share
Download
background image

Car Seat Installation with Base

Test your installation of the base again, by
moving the base from side to side. You should

NOT

be able to move the base easily and

loosen the vehicle belt system.

Note:

Regularly check to be sure your base

installation is secure.

Stay-in-View™ Infant Car Seat

42

If, after following these installation instructions,
you cannot firmly install the base, choose a
different rear vehicle seating location to install 
the base.

IMPORTANT!

10

CORRECT

INCORRECT

10

10

Summary of Contents for 79050

































































Reviews:

No comments

Related manuals for 79050

RECARO SALIA ELITE User Manual preview
SALIA ELITE
Brand: RECARO Pages: 208
Koopers Nex+ Instruction Manual preview
Nex+
Brand: Koopers Pages: 6
Saab 12 799 012 Installation Instructions Manual preview
12 799 012
Brand: Saab Pages: 11
Directed Electronics Python 580 Owner'S Manual preview
Python 580
Brand: Directed Electronics Pages: 44
Cosco APT 50 Instructions Manual preview
APT 50
Brand: Cosco Pages: 34
Edwards & Co Ed & Co multi-fix PA0101 Instruction Manual preview
Ed & Co multi-fix PA0101
Brand: Edwards & Co Pages: 14
Edwards & Co Capsule 2 Series Instruction Manual preview
Capsule 2 Series
Brand: Edwards & Co Pages: 20
Edwards & Co Avery Base Unit Use & Care Manual preview
Avery Base Unit
Brand: Edwards & Co Pages: 36
NORAUTO 2274269-NO0534-916 Safety Information Manual preview
2274269-NO0534-916
Brand: NORAUTO Pages: 75
nania Type D9 User Manual preview
Type D9
Brand: nania Pages: 36
Safety first Alpha omega all in one Instruction Manual preview
Alpha omega all in one
Brand: Safety first Pages: 30
Britax Hippo Instruction Booklet preview
Hippo
Brand: Britax Pages: 10
RECARO OPTIAFIX Instructions For Installation And Use Manual preview
OPTIAFIX
Brand: RECARO Pages: 17
RECARO Performance Crossover User Manual preview
Performance Crossover
Brand: RECARO Pages: 27
RECARO Expert plus Reha Instructions For Assembly And Use preview
Expert plus Reha
Brand: RECARO Pages: 4
RECARO Performance BOOSTER Instruction Manual preview
Performance BOOSTER
Brand: RECARO Pages: 40
RECARO MAKO ELITE User Manual preview
MAKO ELITE
Brand: RECARO Pages: 36
RECARO Monza Nova IS Instructions For Installation And Use Manual preview
Monza Nova IS
Brand: RECARO Pages: 60

Brands by name

Popular brands

Load more brands