18
Dimensions are nominal and illustrations and specifications are based
on the latest product information available at the time of publication.
The right is reserved to make changes at any time without notice.
SAFEAIRE
®
LABORATORY FUME HOODS
OPERATION, MAINTENANCE AND INSTALLATION INSTRUCTIONS
INSTALLATION
INSTALLING CEILING ENCLOSURE TO POSTLESS SASH TYPE FUME HOODS
Hardware included:
2 - Front panels
2 - Front panels-removable
2 - Side panels
2 - Front support brackets
2 - Rear support brackets
2 - Middle support brackets
1 - Bag assembly
Tools required:
#2 Phillips screwdriver.
1. Fasten support brackets (
1
) in front top of frame assembly in
holes provided. Use 1/4-20 X 3/4" hex head thread
cutting screws (HHTCS) (
2
) furnished in bag assembly to
fasten brackets.
2. Fasten rear support (
3
) to rear top of frame assembly. Use
No. 8 X 5/8" Phillips pan head sheet metal screws
(PPHSMS) (
4
) furnished in bag assembly.
3. Install right-hand (
5
) and left-hand (
6
) side panels to
supports using No. 8 X 5/8" PPHSMS (
4
).
4. Install two middle supports (
12
) to louver panels with four
No. 8 X 5/8" PPHSMS (
4
).
5. Install front panels (
7
) to side panels and middle supports
using No. 8 X 5/8" PPHSMS (
4
).
6. Subassemble thumb screws (
8
) and push retainers (
9
) to
removable panels (
10
).
7. Insert hole fasteners (
11
) in larger hole in flange of side
panels.
8. Insert top flange of removable panels under and behind front
panels. Fasten thumb screws and tighten.
5
10
2
1
2
1
3
4
4
3
4
4
4
6
4
9
8
9
8
11
11
12
4
12
4
7
7
4
10
9
8
11
11
Summary of Contents for SAFEAIRE series
Page 1: ......