SAFEAIRE
®
LABORATORY FUME HOODS
OPERATION, MAINTENANCE AND INSTALLATION INSTRUCTIONS
INSTALLATION
17
Dimensions are nominal and illustrations and specifications are based
on the latest product information available at the time of publication.
The right is reserved to make changes at any time without notice.
INSTALLING CEILING ENCLOSURE TO AUXILIARY AIR FUME HOODS
Hardware included:
1 - Front panel-removable
2 - Side panels
2 - Front support brackets
2 - Rear support brackets
1 - Bag assembly
Tools required:
#2 Phillips screwdriver.
1. Fasten support brackets (
1
) in front top of frame assembly in
holes provided. Use 1/4-20 X 3/4" hex head thread
cutting screws (HHTCS) (
2
) furnished in bag assembly to
fasten brackets.
2. Fasten rear support (
3
) to rear top of frame assembly. Use
No. 8 X 5/8" Phillips pan head sheet metal screws
(PPHSMS) (
4
) furnished in bag assembly.
3. Install right-hand (
5
) and left-hand (
6
) side panels to
supports using No. 8 X 5/8" PPHSMS (
4
).
4. Install clips (
12
) into top square holes of removable panel
(
10
).
5. Subassemble thumb screws (
8
) and push retainers (
9
) to
removable panel (
10
).
6. Insert hole fasteners (
11
) in larger hole in flange of side
panel.
7. Insert clip of top flange of removable panel into square holes
of side panels. Fasten thumb screws and tighten.
5
10
2
1
2
1
3
4
4
3
4
4
4
6
4
9
8
9
8
11
11
12
12
Summary of Contents for SAFEAIRE series
Page 1: ......