16
Dimensions are nominal and illustrations and specifications are based
on the latest product information available at the time of publication.
The right is reserved to make changes at any time without notice.
SAFEAIRE
®
LABORATORY FUME HOODS
OPERATION, MAINTENANCE AND INSTALLATION INSTRUCTIONS
INSTALLATION
INSTALLING CEILING ENCLOSURE TO FUME HOODS OTHER THAN AUXILIARY AIR AND POSTLESS SASH
Hardware included:
1 - Front panel
1 - Front panel-removable
2 - Side panels
2 - Front support brackets
2 - Rear support brackets
1 - Bag assembly
Tools required:
#2 Phillips screwdriver.
1. Fasten support brackets (
1
) in front top of frame assembly in
holes provided. Use 1/4-20 X 3/4" hex head thread cutting
screws (HHTCS) (
2
) furnished in bag assembly to fasten
brackets.
2. Fasten rear support (
3
) to rear top of frame assembly. Use
No. 8 X 5/8" Phillips pan head sheet metal screws (PPHSMS)
(
4
) furnished in bag assembly.
3. Install right-hand (
5
) and left-hand (
6
) side panels to
supports using No. 8 X 5/8" PPHSMS (
4
).
4. Install front panel (
7
) to side panels with No. 8 X 5/8"
PPHSMS.
5. Subassemble thumb screws (
8
) and push retainers (
9
) to
removable panel (
10
).
6. Insert hole fasteners (
11
) in larger hole in flange of side
panels.
7. Insert top flange of removable panel under and behind front
panel. Fasten thumb screws and tighten.
7
5
10
2
1
2
1
3
4
4
3
4
4
4
6
4
4
4
9
8
9
8
11
11
Summary of Contents for SAFEAIRE series
Page 1: ......