SAFEAIRE
®
LABORATORY FUME HOODS
OPERATION, MAINTENANCE AND INSTALLATION INSTRUCTIONS
INSTALLATION
13
Dimensions are nominal and illustrations and specifications are based
on the latest product information available at the time of publication.
The right is reserved to make changes at any time without notice.
BAFFLE INSTALLATION AND ADJUSTMENT
(cont..)
Installing Multi-Position Fixed Baffle
1. Place top baffle into position by engaging top edge into
front exhaust collar extrusion. Lift baffle up and into upper
support brackets to lock into position.
2. Place center baffle into desired exhaust position by engaging
top edge into appropriate slots on bottom of uppermost
baffle support brackets, see positioning label on right-hand
side panel. Lift and lock baffle into position.
3. Place lower baffle into proper position. Lift and lock baffle
into lower support brackets.
Installing Remote Exterior Control Baffle
1. Place top baffle into position by engaging top edge into
front exhaust collar extrusion. Lift baffle up and into upper
support brackets to lock into position.
2. Align forked end of remote arm with any of three (3) slots in
right-hand upper baffle support bracket. Lift center baffle up
and into slots in upper baffle supports, being sure to capture
right-hand edge of baffle between fingers of remote control
arm. Lift and lock baffle into position.
3. Place lower baffle into proper position. Lift and lock baffle
into lower support brackets.
Exhaust Collar Extrusion
Top
Baffle
Center
Baffle
Lower
Baffle
Upper Support Bracket
Baffle Positioning Label
Lower Support Bracket
Top Baffle
Center Baffle
(Remote)
Center Baffle
(Fixed)
and Lower Baffle
Summary of Contents for SAFEAIRE series
Page 1: ......