Lit. No. 72446, Rev. 05
71
November 15, 2020
OPERATING YOUR SNOWPLOW
NOTE: Always transport the XLS™ snowplow
with both wings fully retracted.
1. Completely raise the blade.
2. Adjust the blade height for maximum
snowplow headlamp illumination.
3. Adjust the blade to the straight position.
4. Turn the control OFF to lock the blade in
place.
NOTE: Overheating is unlikely under normal
driving conditions, but occasionally the
snowplow may be positioned where it deflects
air away from the radiator. If this occurs,
stop the vehicle and raise, lower, or angle the
snowplow slightly to correct overheating.
NOTE: Only the driver should be in the vehicle
cab when the snowplow is attached.
TRANSPORTING SNOWPLOW
NOTE: For V-plows, use care when driving or
entering driveways with the snowplow in the
retracted (vee) position. The outer ends of the
cutting edges could contact the ground.
WARNING
Position blade so it does not block
headlamp beams.
Do not change blade position while
traveling. You could suddenly lower blade
accidentally.
CAUTION
Transport speed should not exceed
45 mph (72 km/h). Further reduce speed
under adverse travel conditions.
