![Fisher Engineering SNOWPLOW Owner'S Manual Download Page 10](http://html1.mh-extra.com/html/fisher-engineering/snowplow/snowplow_owners-manual_2296487010.webp)
Lit. No. 72446, Rev. 05
11
November 15, 2020
HYDRAULIC SAFETY
• Always inspect hydraulic components and
hoses before using. Replace any damaged or
worn parts immediately.
• If you suspect a hose leak, DO NOT use your
hand to locate it. Use a piece of cardboard
or wood.
FUSES
The FISHER
®
electrical and hydraulic systems
contain several automotive‑style fuses. If a
problem should occur and fuse replacement
is necessary, the replacement fuse must be
of the same type and amperage rating as the
WARNING
Hydraulic fluid under pressure
can cause skin injection injury. If
you are injured by hydraulic fluid,
get medical attention immediately.
SAFETY
original. Installing a fuse with a higher rating can
damage the system and could start a fire. Fuse
Replacement, including fuse ratings and locations,
is located in the Maintenance section of this
Owner's Manual.
PERSONAL SAFETY
• Remove the ignition key and put the vehicle in
PARK or in gear to prevent others from starting
the vehicle during installation or service.
•
Wear only snug-fitting clothing while working
on your vehicle or snowplow.
• Do not wear jewelry or a necktie, and secure
long hair.
• Wear safety goggles to protect your eyes from
battery acid, gasoline, dirt, and dust.
• Avoid touching hot surfaces such as the
engine, radiator, hoses, and exhaust pipes.
•
Always have a fire extinguisher rated BC handy,
for flammable liquids and electrical fires.