Lit. No. 72446, Rev. 05
106
November 15, 2020
Air Removal – XtremeV™, XV2™, and
EZ-V
®
Blades
a. Turn the control ON and completely
extend and retract the driver‑side wing
several times. With all rams fully retracted,
turn the control OFF.
b.
Fill the reservoir to the top of the fill hole
and replace the fill plug.
NOTE: Loosen fill plug slowly to relieve any
pressure in the reservoir.
MAINTENANCE
WARNING
To prevent accidental movement of
the blade, always turn the control OFF
whenever the snowplow is not in use. The
power indicator light will turn OFF.
c. Repeat Steps a and b for the
passenger‑side wing.
d. Turn the control ON and raise and lower
the snowplow several times. Activate the
control FLOAT function and manually
collapse the lift ram all the way after each
lowering of the blade. With all rams fully
retracted, turn the control OFF.
e.
Fill the reservoir to the top of the fill hole
and replace the fill plug.
