Lit. No. 72446, Rev. 05
107
November 15, 2020
Air Removal – XLS™ Blades
a. Turn the control ON and completely
extend and retract the driver‑side
wing several times. Repeat for the
passenger‑side wing. With the wing
and lift rams fully retracted, turn the
control OFF.
b.
Fill the reservoir to the top of the fill hole
and replace the fill plug.
NOTE: Loosen fill plug slowly to relieve any
pressure in the reservoir.
c. Turn the control ON. Angle the blade
fully left and right and raise and lower
the snowplow several times. Activate the
control FLOAT function and manually
collapse the lift ram all the way after each
lowering of the blade. With all rams fully
retracted, turn the control OFF.
d.
Fill the reservoir to the top of the fill hole
and replace the fill plug.
WARNING
To prevent accidental movement of the
blade, always turn the control OFF whenever
the snowplow is not in use. The power
indicator light will turn OFF.
MAINTENANCE
