Lit. No. 72446, Rev. 05
54
November 15, 2020
One-Touch FLOAT
One‑touch FLOAT immediately activates the
FLOAT mode and releases the blade to the
ground, without having to hold the button or lever
in LOWER. This can improve transition time when
backing up to plow forward again, eliminating the
time spent holding the control and waiting for the
blade to fully drop.
All controls come standard with this feature
DISABLED. To enable/disable this feature,
perform the following steps. Performing the
sequence multiple times will toggle the feature
between enabled and disabled.
Enable/Disable Procedure
1. Turn the vehicle ignition switch to the "ON" or
"ACCESSORY" position. (It is not necessary
to start the vehicle.)
OPERATING YOUR SNOWPLOW
2. Verify that the control power indicator is OFF.
If the power indicator light is red, the control
is ON. Move the ON/OFF switch to "OFF" or
push the ON/OFF button to turn the control
OFF.
3. Move and hold the control lever to the
"LOWER" position or press and hold the
LOWER button while turning the control ON.
The power indicator light will turn ON and the
FLOAT light will flash, indicating the status of
the feature.
Light Flash Indicators
Light
Description
POWER – Red Solid ON = Control is ON
FLOAT – Green 1 Flash = One‑touch FLOAT disabled
2 Flashes = One‑touch FLOAT
enabled
