15
Connecting to the water tap
1
Move the refrigerator in front of the
cabinetry close enough to allow access
behind for power and water connections (
A
).
IMPORTANT!
●
●
The water connection instructions below are intended
only for the professional installer.
●
●
The standard refrigerator does not include water fittings
and can be purchased separately by the customer.
●
●
Fisher & Paykel water fittings are available (part number: 841301) and comply with local regulations.
●
●
Ensure water tubing is routed away from any sharp objects, sharp corners, and not in a location where it can be kinked or
squashed. Beware of kinking the tube as this will stop water flow.
●
●
Ensure a firm contact is observed as the refrigerator engages the anti-tip bracket, min. 60mm overlap.
4
Secure connection by attaching
the locking key in between the
water tap connection and locking
collet (
D
).
5
Fasten the water tap connection
to the cold water supply tap.
Take care not to over-tighten the
tap connection (
E
).
Note:
●
●
The water tap connection supplied should fit most installation situations.
●
●
Turn isolating tap on and check that all connections are dry and free of drips.
B
C
D
A
!1
CONNECT TO WATER AND POWER SUPPLY
2
Uncoil the tubing from the back of the product,
and insert the tubing firmly to water tap
connection (
B
).
– The tube should push in at least 16mm
before reaching the stop.
3
Pull gently on tubing to ensure it is locked in (
C
).
6
Firmly insert water tubing into the PRV. The tube should push in at least
16mm before reaching the stop. Once inserted, pull gently on tubing to
ensure it is locked in (
F
).
Secure the connection by attaching the locking key in between the
PRV and water tubing (
G
). Mount the PRV back into the clip.
G
F
1
Attach the power cord clip to the back of your refrigerator (
H
).
2
Connect the refrigerator to the electrical supply (115VAC, 60Hz
with the fitted plug and lead, and turn on (
I
).
– We recommend to connect the refrigerator to its own
isolating switch.
3
Secure the excess power cord length onto the clip (
J
).
DETAIL B
SCALE 1 : 5
H
I
IMPORTANT!
Ensure that the power cord and water tubing are not rolled over or
damaged when pushing the refrigerator into position.
2
3
4
E
Connecting to the power outlet
J
