19
!4
HANG THE DOOR PANELS
1
Secure top studs into the
refrigerator doors, ensure the
open end faces the top.
Repeat on all refrigerator doors.
3
Hang door panel onto the top
studs and align the side bracket
forks onto the refrigerator door.
Ensure the forks are positioned
in the body of the side screw.
5
Once satisfied, secure top door
studs with M8 washer and M8
nut. The top of the stud must
remain below the top face of
the door panel.
6
Secure side bracket forks by
tightening side studs.
Repeat this process for all
other non-Ice & Water panels.
2
Secure side screws mid-way into
the refrigerator doors x4 for each
French door and drawer (2x).
Repeat on all refrigerator doors.
4
Door panels have full axis
adjustment to ensure they are
flush with adjacent walls, or until
satisfactory. To adjust the height
of the panels turn clockwise to
raise stud or counter-clockwise
to lower stud.
For non-Ice & Water models only
