20
!4
HANG THE DOOR PANELS
3
Remove water tube from holder on
the refrigerator door.
4
Hang door panel onto M8 studs.
Ensure the panel is free to pivot for
water connections (
A
).
5
Connect display harness onto the refrigerator door
by inserting firmly until you feel it clip securely (
B
).
On the external display, enable the dispenser lock,
this will help prevent any water from dispensing
during water connection. To lock, press the
button for 4 seconds. The LED above the button
will illuminate.
A
B
6
Firmly push the water tube into the spigot behind the
door panel until the marked line is not visible.
Ensure the water tube is routed away from any sharp
objects, sharp corners, and not in a location where it can
be kinked or squashed when the door panel is secured,
(as this will stop water flow).
To secure door panel, follow the instructions in the next
section: ‘Hang non-Water dispensing door panels’.
For Ice & Water models only
1
Remove the external display
module from inside the product.
Thread the display harness
through the door panel cavity.
Ensure the grommet is engaged.
2
Angle top display tabs into the
door panel. Ensure the harness
is free of pinching. Firmly push
against bottom display tabs
and insert into the door panel
until you feel it clip securely.
Ensure the display is flush with
the door panel.
