-32 -
Service Manual
Issue
Rev.
Model No:
DH8060P1
9-13 User Warnings
Description Description
Displayed as
Lint filter
blocked
If blockage detected the dryer runs with no heat for a cool
down period and then stops and sounds a user alarm and
flashes the clean lint filter message and lint filter LED
If the user opens the door and restarts 3 times and the
dryer still senses restricted air flow then the dryer will stop
and display error code 6
Empty Water
Tank
When tank full detected the water tank LED flashes and
the dryer will run with no heat to complete a cool down
period and then stop. After the user empties the tank the
product will start when start/pause key is pressed
Door Open
If the door is open and the start/pause button is pressed
the user warning tone sounds and the display shows door
Door Open
If the door is left open after the start/pause button is
pressed and has not been closed for 2 minutes. The user
warning tone sounds and the display shows door
Wool Cycle
Woollen items should be dryed on the rack. If the
conductivity sensors register a damp load when the
woollen cycle is selected the dryer will stop and return to
the start/pause state, sound alarm number 5 and show
“FIt rAc”
The product enters this mode automatically if a user warning state is detected and the specified
number of auto start attempts is exceeded.
User Warnings are displayed in plain text. Where multiple words are displayed one at a time with
a 1s pause between changing from one word to the other.
A continuous tone is sounded – make sound number 5 (USER ALARM) continuously until any key
is pressed.
The following keys are valid in user warning mode:
