-27 -
Service Manual
Model No:
DH8060P1
Issue
Rev.
Chapter 9.
Fault Detection
Y
9-1
The dryer does not start
The power supply plug peels off;
The local circuit is out of power;
T
he door is not closed tightly;
The power button is OFF
The Start/Pause button has not
been pressed
The water tank is full;
Y
Y
Y
Y
Y
N
N
N
N
N
Insert the power plug into an
appropriate receptacle and
turn on the power
Close the door
tightly
Put on the local circuit
Press on the power button
The Start/Pause button has
not been pressed;
Empty the tank
The envirment temperature is
too low;
Y
N
Use the dryer when enviroment
temperature is higher than 2 .
Check if the PCB is failed.
Y
N
Change PCB.
